A finite element study comparing Advansync® and Twin Block in mandibular anterior repositioning.

OBJECTIVE: This study aims to utilize the finite element method (FEM) to compare the dentoalveolar and mandibular effects associated with anterior mandibular repositioning using AdvanSync® (ADV) and Twin Block (TB). METHODS: A patient with Class II skeletal malocclusion and mandibular retrognathism was selected. A TB appliance was subsequently applied. Computed Tomography (CT) scans were acquired at the beginning of treatment (T1) and 8 months later (T2). Concurrently, a numerical TB model was validated through FEM simulations, which were compared with the T2 results. The ADV appliance was virtually simulated to evaluate stress and deformation on the condyle, symphysis, first lower molar and lower central incisors. RESULTS: Both simulations demonstrated significant mandibular advancement. However, ADV led to less incisor proclination and more molar intrusion compared to TB. ADV exhibited increased stress in the lower molar area, while TB had higher stress in the lower incisor region. Stress and deformations in the condyle and mandibular symphysis were similar in both simulations, with the highest stress observed at the condylar neck and the lowest at the upper pole of the condylar head. CONCLUSIONS: Both appliances achieved similar levels of mandibular advancement, with greater proclination of the lower central incisors and more widespread distribution of stress and molar intrusion when using ADV compared to TB.

Differences in third molar development and angulation in class II subdivision malocclusions.

PURPOSE: To assess and compare the developmental stages and angulations of third molars between the class II and class I sides in class II subdivision malocclusions. METHODS: This retrospective study was performed using panoramic x­rays of 38 individuals (mean age: 15.5 years; 24 females, 14 males) with class II subdivision malocclusions, which were further divided into type 1 and 2 subgroups according to midline deviation, and a control group of 42 individuals (mean age: 17.0 years; 30 females, 12 males) with normal occlusion. Third molars were categorized using the developmental stages defined by the Demirjian method. Angles between the third molars and horizontal reference lines and also to the second molars were measured. RESULTS: No difference was found in developmental stages or angulations between the left and right third molars in the control group. In the class II subdivision malocclusion cases, no difference in third molar developmental stages was observed, but the angle between the long axes of the mandibular third and second molars was significantly greater on the class II side. In the type 2 subgroup, developmental stage of the maxillary third molar was more advanced on the class II side. In both subgroups, the angles of the maxillary third molars' long axis to the interorbital plane differed significantly between the two sides. CONCLUSION: Class II subdivision malocclusion may cause differences in third molar development and angulations between the two sides. Orthodontic treatment should be planned considering the third molars in this malocclusion.

Evaluation of the maximum tongue and lip pressure in individuals with Class I, II, or III Angle malocclusions and different facial types / Avaliação da pressão máxima da língua e dos lábios em indivíduos com má oclusão Classe I, II e III de Angle e diferentes padrões faciais

ABSTRACT Purpose To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types. Methods A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference. Results There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals. Conclusion Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

RESUMO Objetivo comparar a pressão máxima anterior e posterior da língua, a resistência da língua e a pressão labial em indivíduos com más oclusões Classe I, II e III e diferentes tipos faciais. Método foi realizado um estudo analítico observacional transversal em 55 indivíduos (29 homens e 26 mulheres) com idades entre 18 e 55 anos. Os participantes foram divididos em grupos de acordo com a classificação de Angle para má oclusão (Classe I, II e III) e tipo facial. A pressão máxima anterior e posterior da língua, a resistência da língua e a pressão máxima dos lábios foram medidas usando o IOPI (Iowa Oral Performance Instrument). Para determinar o tipo facial, a análise cefalométrica foi realizada utilizando como referência a análise Ricketts VERT. Resultados não houve diferença estatisticamente significativa ao comparar a pressão máxima das regiões anterior e posterior da língua, a pressão máxima dos lábios ou a resistência da língua nos diferentes tipos de má oclusão. A pressão máxima posterior da língua foi menor em indivíduos com tipo facial vertical do que nos indivíduos mesofaciais. Conclusão a pressão de língua e lábios, assim como a resistência de língua em adultos não foi associada ao tipo de má oclusão. No entanto, existe uma associação entre o tipo facial e a pressão posterior da língua.

Orthodontic biomechanics with intermaxillary elastics

ABSTRACT Introduction: Intermaxillary elastics are orthodontic resources widely used in various malocclusions. Their main advantages are low cost, easy insertion and removal by patients, and application versatility. As main disadvantages, we can highlight the need for cooperation from patients and the side effects normally present in treatments with this resource. Knowledge of the biomechanics involved in the use of intermaxillary elastics is essential to take full advantage of the desired effects and avoid unwanted effects in their use. Objective: Therefore, the objective of this article is to describe the anchorage preparation, connection methods, time and force of use, and side effects involved in the use of intermaxillary elastics for the treatment of anteroposterior, vertical and transverse problems. For that, clinical cases and biomechanics schemes will be presented, in which all these details will be described.

RESUMO Introdução: Os elásticos intermaxilares são recursos ortodônticos amplamente utilizados nas diversas más oclusões. Possuem como principais vantagens o baixo custo, fácil inserção e remoção pelos pacientes, e versatilidade de aplicação. Como desvantagens podemos destacar a necessidade de cooperação dos pacientes e os efeitos colaterais normalmente presentes nos tratamentos com esse recurso. O conhecimento da biomecânica envolvida no uso dos elásticos intermaxilares é fundamental para se obter o máximo de efeitos desejados e evitar os efeitos indesejados na sua utilização. Objetivo: O objetivo desse artigo é descrever o preparo da ancoragem, as formas de conexão, o tempo e a força de uso, além dos efeitos colaterais envolvidos na utilização dos elásticos intermaxilares para tratamento de problemas anteroposteriores, verticais e transversais. Para isso, serão apresentados casos clínicos e esquemas de biomecânica em que todos esses detalhes serão descritos.

Tratamento de uma má oclusão de Classe II com propulsor mandibular Forsus associado à tração de canino inferior impactado devido ao odontoma ­ relato de caso / Treatment of a Class II malocclusion with Forsus appliance associated with traction of an impacted mandibular canine due to odontoma ­ a case report

Resumo O objetivo deste caso clínico foi relatar o tratamento de uma paciente portadora de má oclusão de Classe II com aparelho de propulsão mandibular fixo Forsus associado à tração de canino inferior retido devido a um odontoma. Após exame clínico e radiográfico, foi detectada a retenção prolongada do canino inferior decíduo direito devido à presença desse odontoma. O exame clínico também mostrou que a paciente apresentava uma má oclusão de Classe II. Após a extração do dente decíduo e excisão do odontoma, foi colado um acessório no canino retido e instalado o aparelho fixo. Inicialmente, foi planejada a instalação de um APM devido ao seu baixo custo, no entanto, a paciente não se adaptou e foi instalado um Forsus. Ao final de 48 meses, o canino inferior direito alcançou o plano oclusal e a má oclusão de Classe II foi corrigida. Após 2 anos da finalização do tratamento, os resultados obtidos se mostraram estáveis. O objetivo foi avaliar os efeitos dentários e tecidos moles no tratamento da má oclusão de Classe II leve a moderada de uma paciente no final de crescimento puberal, analisando o antes e depois da face no desenvolvimento dentofacial e os efeitos do aparelho de protração. Concluiu-se que o propulsor mandibular associado ao aparelho fixo corrigiu a má oclusão de Classe II basicamente através da protrusão dentoalveolar do arco inferior. (AU)

Abstract The objective of this case report is to present the treatment of a patient with Class II malocclusion with a Forsus fixed appliance associated with the traction of an impacted mandibular canine due to an odontoma. After clinical and radiographic examination, prolonged right primary mandibular canine retention was detected. In addition, the mandibular canine was impacted due to the presence of this odontoma. Clinical analysis also showed that the patient had a Class II malocclusion. After the extraction of the primary canine and excision of the odontoma, an orthodontic accessory was bonded to the impacted canine, and the fixed appliance was placed. Initially, an APM (mandibular protractor appliance) was planned due to its low cost. However, the patient did not cooperate with its use, and a Forsus was placed. At the end of 48 months, the right mandibular canine reached the occlusal plane, and the Class II malocclusion was corrected. (AU)

Orthodontists' preferences in the use and timing of appliances for the correction of malocclusions in growing patients / Preferencias de los ortodoncistas en el uso y momento oportuno de uso de aparatos para la corrección de maloclusiones en pacientes en crecimiento

Objective: To evaluate orthodontists' preferences in the use and timing of appliances for the correction of Class II and Class III malocclusions in growing patients and the sociodemographic factors that influence these preferences. Material and Methods: Active members of the Colombian Orthodontics Society (SCO) were invited to complete a previously validated survey on the use of Class II and Class III correctors in growing patients. Results: 180 orthodontists responded (80 male, 100 female). The appliances used most frequently in the treatment of Class II malocclusion were Planas indirect tracks (32.78%) and Twin-blocks (30.56%). Facemasks (62.22%) and Progenie plates (25%) were the most prevalent appliances used in the treatment of Class III malocclusions. Regarding treatment timing, 52% of the orthodontists stated that Class II malocclusions must be treated during late mixed dentition or early permanent dentition, 42% stated that treatment for Class III malocclusions should occur during early mixed dentition. Appliance use and treatment timing were significantly associated with sex (p= 0.034), years of practice (p= 0.025), and area of work (private clinics or public institutions), (p= 0.039). Conclusion: Twin-blocks and Facemask appliances were the preferred appliances for Class II and Class III treatment, respectively, in growing patients. Most of the orthodontists believed that Class II malocclusions must be treated during late mixed dentition and that Class III malocclusions must be treated during early mixed dentition. Sociodemographic variables are related factors that influence orthodontists' preferences in the use of these appliances.

Objetivo: Evaluar las preferencias de los ortodoncistas en el uso y momento oportuno de uso de aparatología para la corrección de maloclusiones Clase II y Clase III en pacientes en crecimiento y los factores sociodemográficos que influyen en estas preferencias. Material y Métodos: Se invitó a miembros activos de la Sociedad Colombiana de Ortodoncia (SCO) a completar una encuesta previamente validada, sobre el uso de correctores para Clase II y Clase III en pacientes en crecimiento. Resultados: Respondieron un total de 180 ortodoncistas (80 hombres, 100 mujeres). La aparatología más utilizada en el tratamiento de las maloclusiones de Clase II fueron pistas indirectas de Planas (32,78%) y bloques gemelos (30,56%). La máscara facial (62,22%) y las placas progenie (25%) fueron los aparatos más utilizados en el tratamiento de las maloclusiones de Clase III. En cuanto al momento oportuno del tratamiento, el 52% de los ortodoncistas afirmó que las maloclusiones de Clase II deben tratarse durante la dentición mixta tardía o la dentición permanente temprana, el 42% afirmó que el tratamiento para las maloclusiones de Clase III debe ocurrir durante la dentición mixta temprana. El uso de aparatos y el momento oportuno del tratamiento se asociaron significativamente con el sexo (p= 0,034), los años de práctica (p= 0,025) y el área de trabajo (clínicas privadas o instituciones públicas) (p= 0,039). Conclusión: Los aparatos bloques gemelos y la máscara facial fueron los preferidos para el tratamiento de Clase II y Clase III, respectivamente, en pacientes en crecimiento. La mayoría de los ortodoncistas consideran que las maloclusiones de Clase II deben tratarse durante la dentición mixta tardía y que las maloclusiones de Clase III deben tratarse durante la dentición mixta temprana. Las variables sociodemográficas son factores relacionados que influyen en las preferencias de los ortodoncistas en el uso de estos aparatos.

Cambios en incisivos y su relación con el punto A y el ángulo nasolabial en pacientes Clase II división 2 tratados con y sin extracciones en el Centro Dental Docente UPCH / Changes in incisors and their relationship with point A and nasolabial angle in Class II division 2 patients treated with and without extractions at the UPCH Teaching Dental Center

RESUMEN Antecedentes : Diversos estudios describen las características de la maloclusión clase II-2, sin embargo, son escasos los estudios que evalúan las repercusiones del tratamiento sobre tejidos blandos y esqueléticos. Objetivo : Evaluar los cambios post tratamiento en inclinación y posición incisiva y su relación con el ángulo nasolabial (ANL) y el punto A (PA) en pacientes Clase II división 2, con y sin extracciones en casos de la especialidad de Ortodoncia de la Universidad Peruana Cayetano Heredia. Material y métodos: se realizaron trazados manuales y mediciones de 62 radiografías cefalométricas laterales (31 pre y 31 post-tratamiento), de pacientes con maloclusión de Clase II división 2. El análisis estadístico se realizó con SPSS 21.0 para Windows. Resultados : Se observan proinclinación y protrusión incisiva en todos los pacientes. En pacientes con exodoncias el ANL presentó cambios no significativos, pero correlaciones significativas: cuando aumentó la inclinación incisiva inferior disminuyó el ANL; cuando aumentó el ANL, aumentó el ángulo interincisal (AII). El punto A (PA) experimentó cambios y correlaciones, pero no significativas. En pacientes sin exodoncias no se encontraron correlaciones ni cambios significativos en PA ni en ANL. Las mujeres tratadas sin exodoncia no presentaron cambios significativos, en los hombres los cambios más significativos fueron la inclinación y protrusión incisiva inferior. En los casos con exodoncias en hombres fue el AII; y en las mujeres el AII y el ángulo incisivo superior/ plano palatino. Conclusiones: Existe una relación entre los cambios que se producen en los incisivos y el ANL y PA, aunque la mayoría no son estadísticamente significativos.

ABSTRACT Background : There are studies evaluating cephalometric parameters in Class II division 2 patients. There are no similar investigations in Peru. Objective : To evaluate post-treatment changes in incisor inclination and position and their relationship with the nasolabial angle (ANL) and point A (PA) in Class II division 2 patients, with and without extractions in cases of the Orthodontic specialty program of the Universidad Peruana Cayetano Heredia. Material and methods : manual tracing and measurements of 62 lateral cephalometric radiographs (31 pre and 31 post-treatment) were performed, of patients with Malocclusion Class II division 2. Statistical analysis was performed with SPSS 21.0 for Windows. Results : There was proinclination and incisive protrusion in all patients. In patients with extractions, the ANL presented non-significant changes, but significant correlations: when the lower incisor inclination increased, the ANL decreased; when ANL increased, the interincisal angle (AII) increased. Point A (PA) experienced changes and correlations, but not significant. In patients without extractions, no correlations or significant changes were found in BP or ANL. Women treated without extraction did not show significant changes, in men the most significant changes were lower incisor inclination and protrusion. In the cases with extractions in men it was AII; and in women the AII and the upper incisor angle / palatal plane. Conclusions: There is a relationship between the changes that occur in the incisors and the ANL and PA, although most are not statistically significant.

Utilización del botón de Nance modificado para la propulsión mandibular / Utilization of the modified Nance button for mandibular propulsion

RESUMEN Introducción: En sus inicios la mayoría de los aparatos funcionales fueron removibles, pero cada día más se incrementan los fijos. Su combinación puede incrementar la eficacia en el tratamiento del retrognatimo mandibular. Objetivo: Presentar los resultados del tratamiento con el botón de Nance modificado en una paciente con retrognatismo mandibular. Caso clínico: Paciente femenina de 13 años de edad, que presenta perfil convexo, disfunción neuromuscular, dentición permanente en ambos maxilares con presencia de ligero apiñamiento anterior, relación molar bilateral de distoclusión de ½ unidad, resalte y sobrepase incisivos de 6 mm, mala relación intermaxilar causada por retrognatismo de la mandíbula y escaso remanente de crecimiento mandibular activo. La primera etapa del tratamiento, incluyó psicoterapia, mioterapia y avance mandibular con un aparato funcional fijo (botón de Nance modificado para la propulsión mandibular). A los nueve meses de iniciar el tratamiento se comprobó el cambio en las relaciones intermaxilares en sentido antero-posterior, con disminución del ángulo ANB hasta 20 e incremento del SNB a 78, como reflejo de una buena relación de las bases ósea por crecimiento mandibular. Conclusiones: El tratamiento realizado a la paciente con el botón de Nance modificado para la propulsión mandibular, permitió la obtención de relaciones intermaxilares favorables.

ABSTRACT Introduction: In the beginning, most of the functional appliances were removable, but the fixed ones are increasing every day. Their combination can increase the effectiveness in the treatment of mandibular retrognathymus. Objective: To present the results of the treatment of a patient with mandibular retrognathism treated with the modified Nance button. Case report: A 13-year-old female patient with convex profile, neuromuscular dysfunction, permanent dentition in both jaws with the presence of slight anterior crowding, bilateral distoclusion molar ratio of ½ unit, incisor protrusion and overhang of 6 mm, poor intermaxillary relationship caused by retrognathism of the mandible and little remnant of active mandibular growth. The first stage of treatment included psychotherapy, myotherapy and mandibular advancement with a fixed functional appliance (modified Nance button for mandibular propulsion). Nine months after starting the treatment, the change in the intermaxillary relationships in the anteroposterior direction was verified, with a decrease in the ANB angle to 20 and an increase in the SNB to 78, as a reflection of a good relationship of the bone bases due to mandibular growth. Conclusions: One year after treatment with the modified Nance button for mandibular propulsion, a correct relationship of the patient's bone bases was achieved.

Tratamento ortodôntico compensatório de Classe II com perspectiva de cirurgia ortognática futura ­ relato de caso / Class compensatory orthodontic treatment II with perspective of future orthognathic surgery ­ case report

Resumo A má oclusão de Classe II de Angle pode ser tratada de diversas maneiras com base na discrepância anteroposterior existente, apinhamento, idade e cooperação do paciente. O propósito do tratamento compensatório de Classe II é mascarar a discrepância esquelética por meio de compensações dentárias. O objetivo deste trabalho foi apresentar um relato de caso de um tratamento compensatório de Classe II esquelética, dentária e tegumentar, possibilitando no futuro uma cirurgia ortognática, caso o paciente venha a desejar. O paciente do sexo masculino, 10 anos, procurou o Curso de Pós-Graduação em Odontologia para tratamento ortodôntico, com queixa inicial de "dentes superiores muito para frente". Após análise clínica e exames complementares, ele foi diagnosticado com má oclusão de Classe II de Angle esquelética, dentária e tegumentar. Ele apresentou sobressaliência acentuada com falta de espaço para a erupção dos caninos superiores, então foi optado por extrair os primeiros pré-molares e realizar a retração anterior com elásticos. O paciente, ao final do tratamento, ficou em classe I dentária de caninos, porém o seu perfil convexo só seria melhorado com cirurgia ortognática, como foi mostrado na simulação do Dolphin. Portanto, o tratamento de eleição atingiu resultados desejáveis, sanando assim a Classe II dentária de caninos (AU)

Abstract Angle Class II malocclusion can be treated in a variety of ways based on the existing anteroposterior discrepancy, crowding, age, and patient cooperation. The purpose of Class II compensatory treatment is to mask the skeletal discrepancy through dental compensations. The objective of this study was to present a case report of a skeletal, dental and integumentary Class II compensatory treatment, allowing for an orthognathic surgery in the future, if the patient wishes to do so. The male patient, 10 years old, went to the Postgraduate Course in Dentistry for orthodontic treatment, with an initial complaint of "upper teeth too far forward". After clinical analysis and complementary exams, he was diagnosed with skeletal, dental and integumentary Angle Class II malocclusion. He presented a marked overjet with lack of space for the eruption of the maxillary canines, so it was decided to extract the first premolars and perform anterior retraction with elastics. The patient, at the end of the treatment, was in canine dental class I, but his convex profile would only be improved with orthognathic surgery, as shown in the Dolphin simulation. Therefore, the treatment of choice achieved the desirable results by solving the canine dental Class II malocclusion (AU)

Differential Diagnosis of Skeletal Class II: Orthodontic-Surgical Approach with Surgery First / Diagnóstico Diferencial da Classe II esquelética: Abordagem Ortodôntico-Cirúrgica com Benefício Antecipado

Abstract Orthodontic-surgical treatment with the "Surgery First Approach" provides immediate facial aesthetic improvements and significantly reduces the patient's orthodontic treatment time, avoiding the transient worsening of the facial profile due to dental decompensation that occurs in surgical cases. Thus, this clinical case describes the retreatment of a 22-year-old female leukoderma patient, whose main complaint was related to the proclination of upper and lower incisors. The patient used a mio-relaxing plate for 30 days, which evidenced the skeletal mandibular deficiency and the ½ bilateral Class II malocclusion. Orthognathic surgery first approach associated with the extraction of the 4 premolars was chosen considering the patient's aesthetic demand. The use of a mio-relaxing plate in the diagnostic stage was essential for the real diagnosis of mandibular deficiency and the technique employed made it possible to conclude the treatment avoiding aesthetic commitment, with excellent results. (AU)

Resumo O tratamento ortodôntico-cirúrgico por meio do benefício antecipado proporciona melhorias estéticas faciais imediatas e reduz de maneira significativa o tempo de tratamento ortodôntico do paciente, evitando a piora transitória do perfil facial devido à descompensação dentária que ocorre em casos cirúrgicos. Assim, este caso clínico descreve o retratamento de uma paciente com 22 anos de idade, leucoderma, sexo feminino, que apresentava queixa principal relacionada à inclinação vestibular dos dentes anteriores. Após uso de placa miorrelaxante por 30 dias, verificou-se a presença de Classe II esquelética com deficiência mandibular e ½ Classe II dentária bilateral. Considerando a demanda estética da paciente, optou-se pela abordagem ortodôntico-cirúrgica com Benefício Antecipado associada à extração de 4 pré-molares para correção da inclinação dentária anterior. O uso da placa miorrelaxante foi fundamental para o diagnóstico real da deficiência mandibular e a técnica empregada possibilitou concluir o tratamento evitando o comprometimento estético pré-cirúrgico, com obtenção de excelentes resultados. (AU)

Evaluation of the clinical effectiveness of miniscrews in class i and ii malocclusion patients: a systematic review and meta-analysis

Aim: The present systematic review and meta-analysis aimed to evaluate the clinical effectiveness of miniscrews in Class I and II Malocclusion Patients. Methods: From electronic databases, between 2010 and 2020, PubMed, Embase, Cochrane Library, ISI were used to conduct systematic literature. Two reviewers extracted data blindly and independently from the abstract and full text of the studies they used for data extraction. The mean differences between the two groups (miniscrews vs. conventional anchorage) with a 95 % confidence interval (CI), the Inverse-variance method, and the fixed-effect model were calculated. The Meta-analysis was evaluated using the statistical software Stata/MP v.16 (The fastest version of Stata). Results: A total of 186 potentially relevant titles and abstracts were found during the electronic and manual search. Finally, the inclusion criteria required for this systematic review were met by a total of seven publications. The mean difference of molar mesiodistal movement among seven studies and heterogeneity was -0.53 mm (MD, -0.53 95 % CI -0.69, -0.38. P= 0.00) (I2 = 96.52 %). This result showed maximum reinforcement in miniscrews with fewer mesial movements. Conclusion: The result of the current systematic review and meta-analysis shows that miniscrews in patients with class II and I malocclusion help maintain better anchorage preservation than traditional anchorage devices

Herbst-multibracket appliance treatment: is there an association between lower incisor position changes and the development of labial gingival recessions?

PURPOSE: To assess a potential association between lower incisor (LI) position changes during Herbst-multibracket appliance (Herbst-MBA) treatment and the development of labial gingival recessions (LGR). METHODS: All class II patients (Department of Orthodontics, University of Giessen, Giessen, Germany) who had undergone Herbst-MBA treatment until 2015 with study models and lateral cephalograms available from before (T0) and after treatment plus ≥24 months of retention (T3) were included (n = 259). Lateral cephalograms were evaluated regarding LI position changes: iiL/ML (angle between LI long axis and mandibular plane [MP]), ii-MLPg (distance between LI incisal edge and a line perpendicular to MP through pogonion), apex-MLPg (distance between LI apex and a line perpendicular to MP through pogonion), ii-MLii (distance between LI incisal edge and MP on a line perpendicular to MP through incisal edge). Using study models the distance between the cementoenamel junction and the deepest point of the gingival margin was defined as LGR. RESULTS: The following cephalometric mean changes were recorded (T0-T3): iiL/ML +5.9 ± 5.76° (p = 0.929), ii-MLPg -0.2 ± 0.25 mm (p = 0.430), apex-MLPg +0.1 ± 0.32 mm (p = 0.363), ii-MLii +0.1 ± 0.36 mm (p = 0.206). The mean increase of LGR magnitude measured on the study models was 0.1 ± 0.35 mm. However, no association with the cephalometric LI position changes was found (|R| ≤ 0.2). CONCLUSION: There is no association between the amount of LI position changes and the development of LGR during Herbst-MBA treatment plus retention. Nevertheless, individual predisposition or excessive treatment changes and extraordinary treatment approaches, respectively, might still lead to development of LGR.

Effect of injectable platelet-rich fibrin (i-PRF) in accelerating orthodontic tooth movement : A randomized split-mouth-controlled trial.

BACKGROUND: The role of platelet-rich fibrin (PRF) in accelerating orthodontic tooth movement has been controversially discussed in available clinical studies. OBJECTIVE: To investigate the effectiveness of i­PRF in accelerating maxillary canine retraction. MATERIALS AND METHODS: A split-mouth design was applied in 21 participants (6 men, 15 women; mean age: 20.85 ± 3.85 years) whose class II division I malocclusion required the extraction of both maxillary first premolars. The right and left canines were randomized into intervention and control sides. After the initial leveling and alignment phase and immediately before canine retraction, i­PRF obtained from the brachial vein was injected into the mucosa on the buccal and palatal aspects of the intervention sides. The injection was repeated one month later. Study casts were taken at the initiation of canine retraction (T0) and at monthly visits up to 5 months (T1 through T5). The paired t­test was used to compare the total and monthly rates of canine retraction, canine rotation, and anchorage loss. RESULTS: The average rates of canine retraction were greater on the experimental side at T2, T3, and T4, but this difference with the control side was statistically significantly different only at T2 (P < 0.05). Differences in canine rotation and anchorage loss were not statistically significant. CONCLUSION: The rates of canine retraction following the injection of platelet-rich fibrin were not statistically significantly greater on the experimental than the control sides except at the second month (T2). This apparently transient rate of tooth movement indicates that repeated injections might be needed for sustained effects, a premise meriting more focused research.

Effectiveness of vibrational forces on orthodontic treatment : A randomized, controlled clinical trial.

AIM: AcceleDent® Aura (OrthoAccel® Technologies, Bellaire, TX, USA) is a class II medical device with U.S. Food and Drug Administration approval that uses SoftPulse Technology™ to increase the speed of tooth movement. The aim of this study was to evaluate the application of vibrational forces on the rate of canine distalization. METHODS: A total of 20 patients (10 boys and 10 girls) who had class II division 1 malocclusion or severe crowding and indicated first premolar extractions for treatment were included in the study. The patients were divided into two groups: 8 in the control group and 12 in the study group. Three-dimensional digital models were taken just before canine distalization and after space closure using the 3Shape TRIOS® R700 (3Shape Inc., Copenhagen, Denmark) device. Linear measurements between molars and canines were evaluated. The results were assessed with SPSS 23.0 program (IBM, Armonk, NY, USA). RESULTS: One subject was excluded from the study group due to insufficient oral hygiene and poor patient compliance. Tooth movement rates were 1.06 mm/month for mandibular and maxillary canine teeth in the control group. In the study group, tooth movement rates were 1.24 mm/month for maxillary canines and 1.09 mm/month for mandibular canines. These differences were not statistically significant (p > 0.05). CONCLUSION: AcceleDent® Aura is an easy-to-use device; however, in our study its application did not have any positive effects on canine retraction rates.

Anclaje esquelético para el tratamiento de las anomalías de clase II y mordida abierta anterior: informe de un caso / Skeletal anchorage for the treatment of class II anomalies and anterior open bite: report of a case

El reporte de este caso tiene como objetivo demostrar la utilidad de los anclajes esqueléticos temporarios como son las miniplacas cigomáticas y los microimplantes "buccal shelf" en el tratamiento ortodóncico, en una paciente de 17 años 10 meses de edad, clase II vertical, dólicofacial, con mordida abierta anterior y aumento de la altura facial inferior. Después de la primera fase de tratamiento, siguiendo la secuencia de arcos para completar la alineación, se utilizaron anclajes esqueléticos extrarradiculares con una mecánica de intrusión con fuerzas elásticas durante 10 meses. Se intruyeron sus piezas posteriores superiores e inferiores y se distalizó la arcada superior, corrigiéndose la oclusión. El mentón retrognático y su perfil convexo mejoraron con la autorrotación de la mandíbula (AU)

The objective of this report case is to demonstrate the usefulness of temporary skeletal anchors such as zygomatic miniplates and buccal shelf microimplants in orthodontic treatment, in a 17-year-old 10-month-old, vertical class II, dollicofacial patient with anterior open bite and increased lower facial height. After the first treatment phase, following the arch sequence to complete the alignment, extra-radicular skeletal anchors were used with intrusion mechanics with elastic forces for 10 months. Its upper and lower posterior pieces were intruded and the upper arch was distalized, correcting the occlusion. e retrognathic chin and its convex profile improved with autorotation of the jaw (AU)

Attractiveness of the facial profile: comparison of Class II patients treated with Twin Force® or intermaxillary elastics

ABSTRACT Objective: To compare the facial profile attractiveness of Class II patients treated with Twin Force® or intermaxillary elastics. Methods: Sample comprised 47 Class II patients divided into two groups: G1) TWIN FORCE - 25 patients treated with fixed appliances and Twin Force® fixed functional appliance (mean initial age was 17.91 ± 7.13 years, mean final age was 20.45 ± 7.18 years, and mean treatment time was 2.53 ± 0.83 years); G2) ELASTICS - 22 patients treated with fixed appliances and Class II intermaxillary elastics (mean initial age was 15.87 ± 5.64 years, mean final age was 18.63 ± 5.79 years and mean treatment time was 2.75 ± 0.60 years). Lateral cephalograms from pretreatment and posttreatment were used. Cephalometric variables were measured and silhouettes of facial profile were constructed and evaluated by 48 laypeople and 63 orthodontists, rating the attractiveness from 0 (most unattractive profile) to 10 (most attractive profile). Intergroup comparisons were performed with Mann-Whitney and independent t-tests. Results: At pretreatment, facial profile of the Twin Force® group was less attractive than the Elastics group. Treatment with Twin Force® or Class II elastics resulted in similar facial profile attractiveness, but the facial convexity was more reduced in the Twin Force® group. Orthodontists were more critical than laypeople. Conclusions: Treatment with Twin Force® or Class II elastics produced similar facial profile attractiveness at posttreatment. Profile attractiveness was reduced with treatment in the elastic group, and improved in the Twin Force® group. Facial convexity was more reduced with treatment in the Twin Force® group.

RESUMO Objetivo: Comparar a atratividade do perfil facial em pacientes Classe II tratados com Twin Force® ou elásticos intermaxilares. Métodos: A amostra foi composta por 47 pacientes Classe II divididos em dois grupos: G1 - Twin Force® (25 pacientes tratados com aparelhos fixos e o aparelho funcional Twin Force®; idade inicial média de 17,91 ± 7,13 anos, idade final média de 20,45 ± 7,18 anos, e tempo médio de tratamento de 2,53 ± 0,83 anos); G2 - Elásticos (22 pacientes tratados com aparelhos fixos e elásticos intermaxilares de Classe II, idade inicial média de 15,87 ± 5,64 anos, idade final média de 18,63 ± 5,79 anos, e tempo médio de tratamento de 2,75 ± 0,60 anos). Foram usadas telerradiografias laterais pré- e pós-tratamento. As variáveis cefalométricas foram mensuradas, e silhuetas do perfil facial foram construídas e avaliadas por 48 leigos e 63 ortodontistas, que pontuaram a atratividade entre 0 (perfil menos atraente) e 10 (perfil mais atraente). As comparações intergrupos foram realizadas com os testes Mann-Whitney e t de Student para amostras independentes. Resultados: Na fase pré-tratamento, o perfil facial no grupo Twin Force® foi menos atrativo do que no grupo Elásticos. Os tratamentos com o Twin Force® ou com Elásticos de Classe II resultaram em atratividade semelhante do perfil facial, mas a convexidade facial foi mais reduzida no grupo Twin Force®. Os ortodontistas foram mais críticos do que os leigos. Conclusões: Apesar de os tratamentos com o Twin Force® ou com Elásticos de Classe II terem resultado em atratividade semelhante do perfil facial após o tratamento, a atratividade do perfil foi reduzida com o tratamento no grupo Elásticos e melhorou no grupo Twin Force®. A convexidade facial foi mais reduzida com o tratamento no grupo Twin Force®.

Dolphin software accuracy in soft tissue facial profile prediction of Class II patients in orthognathic surgery / Precisão de software Dolphin na predição do perfil facial de tecidos moles de pacientes Classe II submetidos a cirurgia ortognática

ABSTRACT Objective: The present study aimed to analyze the accuracy of the Dolphin Imaging 11.9® computer program in the surgical prediction of the soft tissue facial profile. Methods: The investigators designed and implemented a retrospective study. It was used a sample of 55 patients, being 14 males and 41 females, aged from 19 to 55 years old. All patients were subjected to surgery orthognathic bimaxillary combined with mentoplasty, in Class II facial profile - Angle. Patients' actual results were compared to the obtained up to a year and a half after the surgery procedure. The study was delineated in three phases. In the first phase, cephalometric preoperative radiographs were performed; in the second phase the postoperative cephalometries were made; in the third phase, the measurements of the soft profile of the virtual analysis were compared with the real post-surgical profile. The data was collected and subjected to statistical analysis in the "R" program, using the t test and ANOVA. Results: The results demonstrated that measures A' and Eis were underestimated in -0.15 ± 0. 52 mm and -0.47 ± 1.05 mm, respectively, while measures Pg' and ANL were overestimated at 0.76 ± 1.98 mm and 3.31 ± 3.60° respectively. There was no evidence of measures, Ls, Li and B', being different between real and virtual. Conclusions: The results of this study suggest that Dolphin 11.9® computer program complies with the function of preserving with reliability virtual surgical planning.

RESUMO Objetivo: O presente estudo teve como objetivo analisar a precisão do programa de computador Dolphin Imaging 11.9® na predição cirúrgica do perfil facial dos tecidos moles. Métodos: Os pesquisadores projetaram e implementaram um estudo retrospectivo. Utilizou-se uma amostra de 55 pacientes, sendo 14 do sexo masculino e 41 do sexo feminino, com idades entre 19 e 55 anos. Todos os pacientes foram submetidos à cirurgia ortognática bimaxilar combinada com mentoplastia, no perfil facial Classe II de Angle. Os resultados reais dos pacientes foram comparados com os obtidos até um ano e meio após o procedimento cirúrgico. O estudo foi delineado em três fases. Na primeira fase, foram realizadas radiografias cefalométricas pré-operatórias; na segunda fase, foram realizadas cefalometrias pós-operatórias; na terceira fase, as medidas do perfil mole da análise virtual foram comparadas com o perfil pós-cirúrgico real. Os dados foram coletados e submetidos à análise estatística no programa "R", utilizando o teste t e ANOVA. Resultados: Os resultados demonstraram que as medidas A 'e Eis foram subestimadas em -0,15 ± 0, 52 mm e -0,47 ± 1,05 mm, respectivamente; enquanto as medidas Pg' e ANL foram superestimadas em 0,76 ± 1,98 mm e 3,31 ± 3,60°, respectivamente. Não houve evidência de medidas, Ls, Li e B', sendo diferentes entre real e virtual. Conclusão: Os resultados deste estudo sugerem que o programa de computador Dolphin 11.9® cumpre a função de preservar com confiabilidade o planejamento cirúrgico virtual.

Como realizar a análise tridimensional das vias aéreas superiores em pacientes ortodônticos? / How to perform a three-dimensional analysis of the upper airways in orthodontic patients?

Resumo As vias aéreas superiores (VAS) são influenciadas pelo crescimento e desenvolvimento do complexo craniofacial e posição espacial dos ossos maxilares durante o tratamento ortodôntico pode estreitar ou aumentar a dimensão dos espaços faríngeos. A análise tridimensional do volume e área axial mínima dos respectivos sub-espaços é benéfica para o planejamento do caso, pois permite identificar possíveis barreiras físicas que comprometem a passagem de ar e o fluxo respiratório, além de ser um método auxiliar de diagnóstico para desordens relacionadas a essa função. A solicitação de tomografias computadorizadas de feixe cônico (TCFC) é necessária para a correta avaliação digital, com os devidos protocolos de aquisição e reconstrução dos exames de imagem, calibração da metodologia e padronização de análise das mesmas. O objetivo deste trabalho é desmitificar o passo a passo específico dessa análise no software Dolphin Imaging® e descrever os fatores técnicos e anatômicos para delimitação dos espaços correspondentes às VAS. Para ilustrar o protocolo foram utilizadas TCFC de paciente com má oclusão de Angle Classe II, 1a divisão antes da instalação (T1) de propulsor mandibular (aparelho fixo cimentado de Herbst com ancoragem dentária) e após 12 meses de tratamento (T2). A partir da mensuração dos espaços correspondentes às VAS, comparando os dois tempos de tratamento, foi possível analisar as alterações do espaço faríngeo após o uso de propulsor mandibular e evidenciar a importância da avaliação tridimensional da dimensão aérea para um planejamento ortodôntico individualizado. (AU)

Abstract The upper airways (UA) are influenced by the growth and development of the craniofacial complex and any alteration in the maxillary bones during orthodontic treatment can narrow or increase the size of the pharyngeal spaces. The three-dimensional analysis of the volume and the minimum axial area of the respective sub-spaces is beneficial for case planning as it allows the identification of possible physical barriers that compromise the air passage and the respiratory flow, besides being an auxiliary diagnostic method for disorders related to this function. The request for cone-beam computed tomography (CBCT) is necessary for the correct digital evaluation with the appropriate protocols for the acquisition and reconstruction of the image exams, calibration of the methodology, and standardization of their analysis. The objective of this work is to demystify the specific step-by-step analysis in the Dolphin Imaging® software and to describe the technical and anatomical factors for delimiting the spaces corresponding to the UA. To illustrate this protocol, CBCT of a patient with Angle Class II malocclusion, first division were analyzed before the installation (T1) of a mandibular thruster (fixed cemented Herbst appliance with dental anchorage) and after 12 months of treatment (T2). From the measurement of the spaces corresponding to VAS, comparing the two treatment times, it was possible to analyze the changes in the pharyngeal space after the use of mandibular thruster and to highlight the importance of the three-dimensional assessment of the air dimension for individualized orthodontic planning. (AU)

Tratamento Ortocirúrgico de uma Maloclusão Classe II Esquelética: Relato de Caso / Orthosurgical Approach of a Skeletal Class II Malocclusion: Case Report

This article aims to present the clinical case of a young male patient who presented severe skeletal Class II malocclusion, who underwent orthosurgical treatment. This case reported the benefits that arise from treatment as well as evaluated changes in the upper airways. Data were collected through review of the medical records, study models, radiographs, cone beam tomography and intra and extra -oral photos. The proposed treatment provided desirable functional and aesthetic results, with adequate intercuspidation between dental arches, mandibular projection, resting. There was no increase in the volume and total area of the oropharynx as a result of orthognathic surgery, only an increase in the minimum axial area.

Este artigo tem objetivo de apresentar o caso clínico de um paciente jovem do gênero masculino que apresentava maloclusão Classe II esquelética severa e foi submetido a tratamento ortocirúrgico. O objetivo deste relato de caso foi abordar os benefícios decorrentes do tratamento bem como avaliar as mudanças das vias aéreas superiores. Os dados foram coletados por meio de revisão do prontuário, modelos de estudo, radiografias, tomografia cone beam e registros fotográficos intra e extrabucais. O tratamento proposto proporcionou resultados funcionais e estéticos desejáveis, com adequada intercuspidação entre os arcos dentários, projeção mandibular, selamento labial em repouso, harmonia facial. Não foi observado aumento do volume e área total da orofaringe em decorrência da cirurgia ortognática, apenas o aumento da área axial mínima.

The influence of orthognathic surgery on the perception of personality traits: A scoping review.

The purpose of this scoping review was to determine the current state of evidence regarding the influence of orthognathic surgery on the perception of personality traits in dysmorphic patients by laypersons. The MEDLINE database was searched for relevant studies using the search strategy: ("Personality"[Mesh]) AND ("Orthognathic Surgery"[Mesh] OR "Orthognathic Surgical Procedures"[Mesh]). A qualitative and quantitative synthesis of the results was performed. Descriptive statistics were used. The PRISMA-ScR guidelines were followed. Five studies, published between 2012 and 2018, remained after screening. Seventy-two dysmorphic patients and 12 class I control individuals were rated based on a total of 296 pre- and postoperative photographs or videos. The available data showed concordant results. Dysgnathic patients were more negatively perceived than class I patients for both aesthetic and personality dimensions. Compared to control class I patients, class II patients were perceived as more flexible, less confident, and less intelligent, whereas class III patients were characterized by dominance, aggressivity, and brutality. Dysgnathic patients showed an improvement in the postoperative ratings but did not reach the ratings attributed to the control class I group in most traits evaluated. This added understanding should help surgeons to counsel their patients in a realistic and reasonable manner.